FWT-191CDMA is a CDMA to Analog Converter, with insert of CDMA SIM Card then connects its line to Analog Telephone Set or to CO Line of PBX or Analog Device Adaptor and then communicate to the word of CDMA Network and Office Telephone or over VoIP World. It supports both incoming call and outgoing call that made it easy way to converge between different worlds of communications. Application of the Fixed Wireless Terminal is variety of apply both home and office, public phone, rural areas, steamer, railway etc.
Features and Functions:
1) Easy to install plug and play to maintenance less
2) Steady industrial module and reliable design ensures good performance
3) Provides share outgoing and optimized circuit directly connecting the exchange device for Extensions
4) Compatible to most telephones, PBX and VoIP gateways (for call Termination)
5) Connect to Alarm systems to realize wireless alarm(for security use)
6) Strong signals with high gain antenna
7) Support SIM card (1.8V,3V)
8) Support DTMF 2'nd dialing out
9) DTMF CLIP(Caller ID display)
10) Hiding subscriber caller id (when sent out)
11Support reverse polarity signal for accounting
12) Signal indicator and power indicator and operating status indicator
13) Support wide range of voltage range and energy saving
14) Most fits with all kinds of weather and environment
15) PIN / network lock (optional)
16) GPRS for internet and data communication feature(optional)
17) Power Back up by li-ion battery(optional)
Specifications:
1) Wireless interface standard: CDMA 800MHZ 2000 1X RTT
2) Frequency ranges:
Tx Frequency: 824.640-848.370MHZ
Rx Frequency: 869.640-893.370MHZ
3) Channel space: 200kHz
4) User line, bell signal: In line with GB/T15279
5) Max power: 0.25W / 0.5W
6)Power Consumption:
A) Standby: Less than 25mAh
B) Transmission: Less than 400mAh
7) Sensitivity: -105dB
8) Dial tone frequency: 450MHz (standard)
9) Surrounding temperature: -10°C ~ +40°C
10) Relative humidity: 45% ~ 90% (without frost)
11) Pressure: 86 ~ 106KPa
12) Environment noise: <60dB
13) Antenna amplifying: 3.5dB (Omni directional), 12dB (certain direction / Chosen direction)
14) AC power: DC 10V - 20V
15) Input: AC100 - 230V, 50 / 60Hz
16) Output: 12V 1A
17) Switching type / transformer type AC adapter (optional)
18) Connector of power: US or European type
19) Dimensions (L x W x H) (average): 185 x 135 x 22mm
20) Weight:
A) FWT: 400g
B) Full set with AC adapter, antenna and box: 700g
21) Colors: White/black (optional)
22) Connection Port: RJ-11 phone sockets
23) Antenna connection: SMA antenna connection
